In this way, the technique is not a superficial application (film or film) - which occurs by means of physical bonding and can be easily removed or damaged by regular use (contact) with the applied surface.
• Water-repellent with a strong visible pearlescent effect;
• Offers good protection against oil if removed within 30 minutes;
• It does not form a film on the substrate;
• Chemically bonds with substrates;
• Stable with regard to UV rays to increase treatment life;
• Permeable to water vapor, lets the stone breathe;
5-year warranty according to performance reports proven by third-party laboratories, except for design failures, structural failures or misuse of the material, as long as the application method below is met.
The average yield of the product is 10 m²/L per coat, depending on the porosity of the applied surface. The more porous, the lower the yield.
According to SGS USA Report: Report of Product Testing Report – Interim Product: Moshe 3000 Stone Lab No.: 22-1808, it was found that in the ASTM D6904 – Wind-Driven Rain test, the samples were attached to a test box and exposed to water spray for approximately 24 hours. The water was sprayed at a dynamic pressure equivalent to a wind of 98 mph. At the conclusion of the test, no visible leakage signs or any visible saturation of the tested blocks were verified.
Our team is ready to answer all your questions about Moshe 3000.
Get in touch
