• It is recommended for protecting ceramic, tile or rustic floors, such as garages in condominiums, businesses or industries, masonry mezzanines, balconies, sidewalks, leisure areas, sports courts, and also metal mezzanines, metal handrails, metal tops, I-beams, among others.
• The product is not recommended for use in places where there is positive or negative water pressure, as it may turn white.
• The product should be applied to a clean and dry substrate. We recommend observing the substrate where the product will be applied. Apply 3 coats. Touch dry: 1 hour. Drying between coats: 1 hour between coats at 25º, for temperatures below 20º: 2 hours. Final drying: 72 hours.

The average yield of the product is 8 to 15 m²/L per coat, depending on the roughness of the applied surface. The more porous/rough, the lower the yield. If a structural screen is used, this yield will be lower.

Use a personal protective mask (ABEK or ABEK-P2 gas filter are mandatory), nitrile or butyl rubber gloves, safety glasses or face protection, waterproof protective clothing (gloves and aprons) and protective boots. If you experience any symptoms of allergy, skin irritation or contact with your eyes, seek medical attention immediately.

Do not reuse the packaging for food purposes, and do not smoke while handling the product. Care should be taken with open packaging in the presence of children, whether or not there is product inside. Do not allow the product to reach water, sewage or soil.